BM-450 BRINE MAKER, MAKES 450 GALLONS OF BRINE IN 25 MINUTES
Making your own brine is easy with a Turbo Turf BM-450 Brine Maker. Just add rock salt and water and 25minutes you will have 23.3% salt brine. You may use bagged salt, bulk salt or sea salt. It requires 2.288 lbs. of salt to make 1 gal. 23.3% sodium chloride brine. Making your own salt brine can cost less than 10 cents a gallon, a fraction of what you would pay buying liquid deicers ready to spray. You can also make your own hot brine good to 5 degrees for as little as 20 cents a gallon by adding 10% liquid calcium chloride to your salt brine.
Turbo Turf’s Brine makers combine high performance and affordable price
Make a load in 25 minutes
Easy to load use bulk or bagged salt
When brine is ready units can self unload
Make HOT brines for colder temperatures
Really easy clean out
Move it easily with a fork lift
Engine and pump are on a pull out tray
Hydrometer for testing brine is included
Watch the Turbo Turf BM-450 make a load of brine.
TURBO TURF’S BM-450 BRINE MAKER CAN LET YOU MAKE YOUR OWN BRINE FOR AROUND 10 CENTS A GALLON
The BM-450 will make about 450 gallons of salt brine. This is a dual tank unit with a 300 gallon mixing tank and 300 gallon brine tank. It has a 2″ poly pump powered by a Briggs and Stratton 900 series (205cc) engine. The engine and pump are mounted on a slide out tray that can be retracted for shipping or storage. Powerful jets dissolve the rock salt and the finished product flows over to the second tank. A hydrometer is included to test your finished product. Just let the unit run until your brine measures 23.3% and then pump it to your storage tank or deicing sprayer. There are fork slots to make it easy to move and if you wish to run it inside and power it with a 220 Volt single phase motor that upgrade is available.
Dimensions. Overall 104″ long with engine in operating position and 92″ long with the engine in storage position. Width is 82″ and height is 51″, Empty weight 760 pounds.
BM-450 Brine maker, dual tanks, 2″ pump. (Hoses to unload unit not included). $ 4,695.00
BM-450-E Brine maker as above but with a 220 V single phase electric motor……….. $ 5,695.00
BM-250 BRINE MAKER, MAKES 250 GALLONS OF BRINE IN 20 MINUTES
The BM-250 will make about 250 gallons of sodium chloride brine in less than a hour. It is a single tank unit with one 500 gallon mixing/storage tank. It has a 2″ poly pump powered by a Briggs and Stratton 900 series (205cc) engine. The engine and pump are mounted on a slide out tray that can be retracted for shipping or storage. Powerful jets dissolve the rock salt. A hydrometer is included to test your finished product. Just let the unit run until your brine measures 23.3% and then pump it to your storage tank or deicing sprayer.
BM-250 Brine maker, 500 gallon tank, 2″ pump. (unloading hose not included). $ 3,695.00
BM-800 BRINE MAKER, MAKES 800 GALLONS OF BRINE IN 25 MINUTES
The BM-800 will make about 800 gallons of sodium chloride brine. This is a dual tank unit with one 500 gallon mixing tank and one 500 gallon storage tank. It has a 3″ poly pump powered by a Briggs and Stratton 8 H.P. Vanguard engine. The engine and pump are mounted on a slide out tray that can be retracted for storage. Time to make a load is about 30 minutes with the gas engine and 45-50 minutes when equipped with the 220 Volt electric motor (may vary on water and air temperature). Because of the size of the unit, the BM-800 is shipped in two parts and about 15 minutes assembly is required. 115″L x 88″W x 6’H
BM-800 Brine maker, 3″ pump. (Unloading hose not included). $ 7,495.00
BM-800-E Brine maker with 220 V Single phase Electric motor and 2″ Pump $ 8,495.00